NEW PRODUCT – Adafruit 2.23″ Monochrome OLED Bonnet for Raspberry Pi




from NEW PRODUCT – Adafruit 2.23″ Monochrome OLED Bonnet for Raspberry Pi
by Angelica

4567 top demo 02 ORIG 2020 05

NEW PRODUCT – Adafruit 2.23″ Monochrome OLED Bonnet for Raspberry Pi


If you’re looking for a bright, readable OLED display for a Raspberry Pi (most likely a Pi Zero) project, this might be just the thing you need!

The Adafruit 2.23″ Monochrome OLED Bonnet for Raspberry Pi is your chonky OLED pal, ready to snap onto any and all Raspberry Pi computers, to give you a vivid display. The Bonnet comes with a 2.13″ diagonal monochrome 128×32 OLED, with sharp white pixels. The OLED the I2C pins plus GPIO #4 for reset, so you have plenty of GPIO connections available for buttons, LEDs, sensors, etc. It sits nice and flat so many cases that have an open top can have this display inserted.

4567 top 01 ORIG 2020 05

Compared to our similar PiOLED display, this OLED has the same resolution but is much larger, so it can be read from across the room. This screen is made of 128×32 individual white OLED pixels and because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like OLED display for their crispness!

Using the display is very easy, we have a Python library for the SSD1305 chipset. Our example code allows you to draw images, text, whatever you like, using the Python imaging library. Our tests showed 30 FPS update rates so you can do animations or simple video.

4567 iso demo 02 ORIG 2020 05

4567 top demo 01 ORIG 2020 05

Comes completely pre-assembled and tested so you don’t need to do anything but plug it in and install our Python code! Works with any Raspberry Pi computer that has a 2×20 connector, such as the Pi B+, Pi 2, Pi 3, Pi 4, and Pi Zero (and any others that have a 2×20 connector!)

On the bottom we have a Qwiic/STEMMA QT connector for I2C sensors and devices so you can plug and play any of our STEMMA QT devices.

Please note that OLED displays are made of hundreds of…OLEDs! That means each pixel is a little organic LED, and if it’s kept on for over 1000 hours it’ll start to dim. If you want to keep the display uniformly bright, please turn off the display (set the pixels off) when it isn’t needed to keep them from dimming.

Check out the GitHub repo for our Python library that has examples and instructions

4567 iso 01 ORIG 2020

4567 bottom 02 ORIG 2020 05

In stock and shipping now!





Original article: NEW PRODUCT – Adafruit 2.23″ Monochrome OLED Bonnet for Raspberry Pi
Author: