PyBadge FeatherWing Snapfit Case #3DPrinting




from PyBadge FeatherWing Snapfit Case #3DPrinting
by Noe Ruiz

This enclosure is designed to secure the PyBadge PCB without any hardware screws. The PCB rests on bottom half with built-in standoffs. The top half features cutouts for the buttons and display. The two halves snap fit together and clamp shut. Features on the edges of the snap allow the case to firmly stay shut but also allow it to re-open. Bottom half features a cutout for FeatherWings. Extra thick loops for clipping lanyards.

Download files

PyBadge
https://www.adafruit.com/product/4200

PyBadge LC
https://www.adafruit.com/product/3939

Mini oval speaker 8ohm 1w
https://adafru.it/4227

350mah 3.7v lipo battery
https://adafru.it/4237

Fully reversible microUSB cable
https://adafru.it/4111

Double hook Lanyard
https://www.adafruit.com/product/3982

Adafruit CAD Files

Need some 3D models for your enclosure or assembly? We have a parts library of common parts and breakouts hosted on github. These models can be downloaded in different formats like STEP, STL and more. Electronic components like the displays, connectors and more can be downloaded from our parts github repo.

3D Parts Library on GitHub

https://github.com/adafruit/Adafruit_CAD_Parts





Original article: PyBadge FeatherWing Snapfit Case #3DPrinting
Author: