NEW PRODUCT – Pimoroni Inky pHAT – eInk Display – Black/White

from NEW PRODUCT – Pimoroni Inky pHAT – eInk Display – Black/White
by Angelica

NEW PRODUCT – Pimoroni Inky pHAT – eInk Display – Black/White


Here at Adafruit we never tire of cool, new displays, so these super sweet e-paper displays really caught our eye! Pimoroni’s Inky pHat is a petite 212×104 pixel two-color display that looks fantastic and is easy to read even in bright daylight. Broadcast your tweets, the weather, or even graphing data. eInk is great for displays that don’t change often, due to the 3-second display-change-cycle. But the contrast and readability cannot be beat. Best of all, if you shut down the Pi, the display stays on, which is pretty magical the first time you see it.

3934 iso 01 ORIG 2018 10

3934 top demo ORIG 2018 10

No soldering required! The display is already assembled and connected via a ribbon cable. Just plop Inky pHAT on your Pi of choice and run the installer, and soon you’ll have the cutest little electronic paper display.

This particular e-Paper display is Black and White only – if you want a splash of color, check out the red tri-color or yellow tri-color versions. You’ll get an extra color layer but it takes longer to switch the display contents with those two.

3934 quarter ORIG 2018 10

Features:

Quick note: Pimoroni’s software does not support Raspbian Wheezy.

3934 top ORIG 2018 10

In stock and shipping now!

Original article: NEW PRODUCT – Pimoroni Inky pHAT – eInk Display – Black/White
Author: